Marble Bath Surround Polished in Bowden

Although most of the work we do involves floor cleaning you should know we also cover stone worktops in Kitchens and countertops in bathrooms. An example being this opulent bathroom with Marble countertops that surrounded the sink and bath.

The bathroom was installed at a house in the up-market area of Bowden which together with the villages of Hale and Hale Barns are regarded as being the wealthiest parts of Greater Manchester. The customer had got in touch to ask if we could restore the appearance of the Marble surrounds which had become dirty and etched through general use.

Marble Bath Surround Before Polishing Bowden Marble Bath Surround Before Polishing Bowden

Restoring the Appearance of Marble Countertops

My first job was to protect the wood panelling and lush red carpet that surrounds the bath, once all was protected we started to use a set of tile doctor six-inch burnishing pads to clean the Marble and restore the polish.

Marble Bath Surround Before Polishing Bowden

The Burnishing pads come in a set of four and are applied to the stone with a little water in sequence from the coarse 400 grit pad which removes etching and then through the medium 800-grit, fine 1500-grit and finally the very fine 3000-grit pad which restore shine to the Marble. I use a hand-held buffing machine to do this and carefully rinse in-between each pad to remove the small amount of slurry which is generated.

The last 3000-grit pad is applied with just a spay of water using what we call a spray burnish technique, this also has the benefit of leaving the stone dry which is exactly how we need it for the next step in the restoration process which is applying a sealer.

Sealing Marble Countertops

To finish off the restoration, I proceeded to seal the Marble tops with Tile Doctor Ultra Seal which is an impregnating sealer that soaks into the pores of the stone protecting it from within. I should add, Ultra Seal is a natural look sealer that doesn’t change the colour of the stone.

The sealer is applied with a soft cloth, left for five minutes and then the excess is polished off with a soft cloth. We also replaced the silicone sealant around the bath and wash basins and once we were finished the bathroom looked newly installed.

Marble Bath Surround After Polishing Bowden Marble Bath Surround After Polishing Bowden

The customer was over the moon that we brought life back to her impressive bathroom.
 
 

Professional Marble Vestibule Polishing in Cheshire

Large Travertine Floor Polished at an Eaton Barn Conversion near Congleton

This customer who lives in Eaton near Congleton had a new barn conversion built with a 120 sq. meters of polished Travertine floor tiles. Unfortunately, he was unable to appreciate the beauty of the floor due to builder’s walking all over them for a few weeks without any protection. With dirt being trodden into the tile they were now in need of a deep clean and polish to bring back the shine and restore the real beauty of the tiles.

Polished Travertine Floor Before Cleaning Eaton Polished Travertine Floor Before Cleaning Eaton

Cleaning and Burnishing Polished Travertine Tiles

After giving the floors a good brush to remove grit etc. the next stage was to apply a set of tile doctor diamond encrusted burnishing pads to take off the ingrained dirt and restore shine to the tiles.

The first pad was a coarse 400 grit which fits onto a rotary machine with water spread on the floor as lubrication. The pads literally scratch off the dirt and the resultant slurry is then removed with a wet vacuum. The floor is then washed and the process was repeated with the next two pads which are 800 and 1500 grit. These pads are much finer and restore the finish of the stone, again the floor is rinsed in between each pad to remove the slurry each time.

Polished Travertine Floor During Cleaning Eaton Polished Travertine Floor During Cleaning Eaton

The floor is then left to dry off overnight which is much quicker when underfloor heating has been installed.

Sealing a Travertine Tiled Entrance Hall

When I came back the next day I finished off the burnishing process using the last floor pad which is applied dry to the floor with a few squirts of water. This final pad is 3000 grit which is super fine and builds up a high gloss shine on the Travertine.

To finish off the process I then sealed the floor using a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the Travertine occupying the pores and preventing dirt from becoming ingrained into the stone. Colour Grow also enhances the natural colours in the stone and in this case, it did a great job of bringing out the brown shades in the Travertine.

Polished Travertine Floor After Cleaning Eaton Polished Travertine Floor After Cleaning Eaton

The customer was over the moon with the finish and asked if I would come back in three weeks to buff the whole floor to a high shine ready for a party that evening.

Polished Travertine Floor After Cleaning Eaton Polished Travertine Floor After Cleaning Eaton

 
 

Professional Travertine Floor Polishing in Cheshire