Large Travertine Floor Polished at an Eaton Barn Conversion near Congleton

This customer who lives in Eaton near Congleton had a new barn conversion built with a 120 sq. meters of polished Travertine floor tiles. Unfortunately, he was unable to appreciate the beauty of the floor due to builder’s walking all over them for a few weeks without any protection. With dirt being trodden into the tile they were now in need of a deep clean and polish to bring back the shine and restore the real beauty of the tiles.

Polished Travertine Floor Before Cleaning Eaton Polished Travertine Floor Before Cleaning Eaton

Cleaning and Burnishing Polished Travertine Tiles

After giving the floors a good brush to remove grit etc. the next stage was to apply a set of tile doctor diamond encrusted burnishing pads to take off the ingrained dirt and restore shine to the tiles.

The first pad was a coarse 400 grit which fits onto a rotary machine with water spread on the floor as lubrication. The pads literally scratch off the dirt and the resultant slurry is then removed with a wet vacuum. The floor is then washed and the process was repeated with the next two pads which are 800 and 1500 grit. These pads are much finer and restore the finish of the stone, again the floor is rinsed in between each pad to remove the slurry each time.

Polished Travertine Floor During Cleaning Eaton Polished Travertine Floor During Cleaning Eaton

The floor is then left to dry off overnight which is much quicker when underfloor heating has been installed.

Sealing a Travertine Tiled Entrance Hall

When I came back the next day I finished off the burnishing process using the last floor pad which is applied dry to the floor with a few squirts of water. This final pad is 3000 grit which is super fine and builds up a high gloss shine on the Travertine.

To finish off the process I then sealed the floor using a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the Travertine occupying the pores and preventing dirt from becoming ingrained into the stone. Colour Grow also enhances the natural colours in the stone and in this case, it did a great job of bringing out the brown shades in the Travertine.

Polished Travertine Floor After Cleaning Eaton Polished Travertine Floor After Cleaning Eaton

The customer was over the moon with the finish and asked if I would come back in three weeks to buff the whole floor to a high shine ready for a party that evening.

Polished Travertine Floor After Cleaning Eaton Polished Travertine Floor After Cleaning Eaton

 
 

Professional Travertine Floor Polishing in Cheshire

Marble Entrance Hall Restored Through Burnishing in Congleton

A fantastic Marble tiled entrance hallway is the first thing you see when you open the door to this property in Congleton. Unfortunately, polished stone does need regular maintenance to keep its appearance, especially in high traffic areas such as this vestibule which had lost their shine, leaving them looking dull and unexceptional. Needless to say, the property owner was keen to get the floor restored to its former glory. That’s where I stepped in.

Marble Tiled Enterance Congleton Before Cleaning

Cleaning and Burnishing a Marbled Tiled Entrance Hall

There was no evidence of old sealers present on the floor, so I started deep cleaning the tiles and grout lines using a solution of Tile Doctor Pro Clean mixed with clean water.

A quick word on cleaning here, as an alkaline-based cleaner, Tile Doctor Pro-Clean is suitable for use on natural stone floors, including acid-sensitive stone such as Marble and Limestone. Many everyday household cleaners from the supermarket are acidic, which will erode the life of the sealer and a strong acid can etch the surface of sensitive stone, so make sure to source the correct cleaning product to avoid this problem.

The cleaning solution was left to soak into the tiles for ten minutes before being worked in to give a thorough clean using a rotary machine fitted with a scrubbing pad. The soiled cleaning solution was then removed with a wet vac machine, and the floor washed down with clean water.

The next step in the restoration was to restore the polish on the surface by burnishing the floor using the Tile Doctor four pad burnishing pad system. This involved the application of a set of diamond encrusted burnishing pads fitted to a floor buffing machine. Each of four the pads are used in sequence from the coarse 400 grit pad through to the 3000 grit extra Fine pad applied in sequence with a little water to lubricate and giving the floor a rinse in-between each pad to remove the slurry.

Sealing a Marble Tiled Entrance Hall

To finish off the restoration, I proceeded to seal the floor using Tile Doctor Shine Powder, a sealer in crystallised powder form which increases the polish and durability of the floor which is especially useful in a high traffic area..

Marble Tiled Enterance Congleton After Cleaning

Once I had polished off the excess, the floor had an exceptionally high shine and a robust, durable surface. Now that the entrance hallway has been completely restored it is a real asset to the house. The customer was very happy with the result and will surely be showing off these beautiful Marble tiles to their guests.
 
 

Professional Marble Vestibule Polishing in Cheshire