According to the Mirror Newspaper Alderley Edge with its restaurants and bars is a playground for footballers; well I certainly didn’t bump into any on a recent visit there to clean and seal this lovely Spanish Terracotta Tiled Kitchen floor.
Joking aside it is a very nice area and fortunately for me the residents are very partial to stone floors. Getting back to the post, we were asked for advice on cleaning and sealing ninety square metres of Spanish Terracotta tiles that had been installed in this kitchen four years prior. The sealer had since worn off and the floor was becoming difficult to clean effectively.
Terracotta tiles are made from soft clay making it very porous and likely to absorb anything that lands on it; as a result, it’s important to maintain the sealer to stop this happening.
Deep Cleaning a Spanish Terracotta Tiled Kitchen Floor
To clean the floor, I soaked the tiles in a strong dilution of Tile Doctor Remove and Go which is a strong stripping and cleaning solution which removes old sealers and also draws out ingrained stains.
After twenty to thirty minutes the solution was worked into the tiles using a black scrubbing pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and this was followed by scrubbing the grout lines with Tile Doctor Pro-Clean and a grout brush until they were clean.
The whole floor was then rinsed with water to remove any soil and trace of cleaning product. The water was then extracted using the wet vacuum. The floor was then checked to make sure it was as clean as it could be and stubborn areas spot treated.
Sealing a Terracotta Tiled Kitchen Floor
The floor was left to dry off overnight and we returned the next day and tested the tiles with a damp meter making sure it was dry before we could seal it. To seal the floor I first applied a single coat of Tile Doctor Colour Grow which soaks into the pores of the tile to enhance its colours. Once this was dry it was followed up by multiple coats of Tile Doctor Seal and Go which adds further protection and adds a nice sheen to the tile.
I took some time to complete due to the porosity of the Terracotta requiring nine coats before the tiles were fully sealed but once done it was transformed and I left a very happy costumer. A quick tip here is that you can always tell when a tile is fully sealed by adding a small drop of water to the tile, if it forms into a bubble then it’s fully sealed.
Sealers protect your tiles from staining and enhance their appearance, however they do wear down over time depending on traffic and what products are used to clean the tiles (don’t use anything even mildly acidic) and this is when dirt can become ingrained in the stone, so if you want to keep your tiles looking their best talk to your local Tile Doctor about their regular maintenance service that will ensure your sealer is kept topped up.