Work by Location Archives - Page 2 of 4 - East Cheshire Tile Doctor

Travertine Tiled Kitchen Floor Before and After Polishing Wilmslow

Polishing a Dull Travertine Kitchen Floor in Wilmslow

1 Comment / Grout-Cleaning, Travertine Tile Cleaning, Wilmslow Tile Cleaning, Work History / Kamila Logonzy

This is a Travertine tiled floor installed at a property in the popular Cheshire town of Wilmslow around 16 years prior. It had previously been maintained by a Tile Doctor colleague about three years ago and the owner was hoping the floor could be given a simple maintenance clean and seal. This is a service we provide as part of an annual maintenance plan, unfortunately after surveying the floor it was clear they had left it far too long, the floor had lost its shine and it would now need to be resurfaced with a set of diamond burnishing pads and then resealed.

Travertine Floor Before Polishing Wilmslow

Naturally burnishing the floor costs more than a simple seal and polish but if you are going to opt for the quicker maintenance plan route it does need to be done at least annually and possibly more frequently if it’s a floor in frequent use such as a kitchen. We agreed a price for the work, and I arranged a time with them to return and renovate the floor.

Cleaning/Renovating a Travertine Tiled Kitchen Floor

To restore the polished appearance of the Travertine I used a set of four burnishing pads which are applied to the floor with a rotary machine. You start with a coarse 400-grit pad using water to lubricate and running it over each tile at least three times. This first pad cleans up the stone and removes old sealers. This is then followed with the finer 800-grit, 1500-grit and finally a 3000-grit pad. Except for the 3000-grit, each pad is applied with water and the floor is rinsed and the soil extracted afterwards with the wet vacuum.

The Grout lines were also deep cleaned with a scrubbing brush and Tile Doctor Pro-Clean tile and grout cleaner. The product really gets to into deep seated dirt and grease which tends to accumulate in the grout. After a final rinse and extraction, the floor was then left to dry off overnight.

Sealing a Travertine Tiled Kitchen Floor

I returned on the second day and started by checking the floor was dry by taking several moisture readings with a damp meter. The readings were good, so I proceeded to seal the floor using a couple of coats of Tile Doctor Colour Grow. Colour Grow is an ideal sealer for Travertine as it seeps into the pores of the stone enhancing the natural brown colours in the process. It also offers great protection going forward.

Whilst I was there I had noticed that one of the doors had scratched the floor, fortunately the polishing process had got the scratches out of the stone but to prevent future scratching I helped them remove the door so a carpenter could shave off a few mm’s from the bottom.

Travertine Floor After Polishing Wilmslow

My customer left the following feedback:

“Second time had Travertine floor restored, cleaned & sealed, the first time was 3 years ago. Great job done then by Simon Bywater. This time Kamila did a really professional job on the kitchen limestone floor. A bit more expensive this time, but a good job was done. Have left instructions for her to contact me in 12 months time for annual maintenance on the same floor, hopefully to prevent restoration being required! Highly recommend the service.”

The floor looked great and they should now be able to maintain it in between the maintenance visits, with day to day cleaning using Tile Doctor Neutral Tile Cleaner.

Professional Restoration of a Travertine Tiled Kitchen in East Cheshire

Polishing a Dull Travertine Kitchen Floor in Wilmslow Read More »

Ceramic Tiled Bathroom Wall Before After Renovation Handforth

Bathroom Shower Tile & Grout Renovation in Handforth

1 Comment / Ceramic Tile Cleaning, Cheadle Hulme Tile Cleaning, Wilmslow Tile Cleaning, Work History / Kamila Logonzy

The pictured Ceramic tiled bath with a shower over was installed eight years prior at a house in the Cheshire town of Handforth. They had cleaned it regularly, but the client was not able to remove all the stains from the grout along with the soap scum which was present on both the tiles and the bath.

Bathroom Shower Tile Before Cleaning Handforth

Despite their best efforts with all varieties of household cleaner, the bathroom looked dirty and uninviting, the grout was getting discoloured in some places and there was lots of soap residue and limescale on the bathtub and taps.

I visited site and discussed with them the process, I was very confident that we could get the bathroom clean again without too much trouble and within one day. They were happy to go ahead with my quote and we arranged a mutually convenient time to return.

Cleaning a Ceramic Tiled Bathroom Shower

To get the tiles clean I used a combination of Tile Doctor Duo Clean on the grout and then a strong dilution of Tile Doctor Remove and Go on the soap scum, this product also draws out ingrained stains and removes heavy grease build-up. With some help from a professional steamer that had a grout attachment I was able to give the area a very deep clean

The soap scum was particularly difficult to remove but the combination of Tile Doctor Remove and Go, the steamer and lots of elbow grease we got the job done.

Bathroom Shower Tile During Cleaning Handforth

Sealing a Ceramic Tiled Bathroom Shower Floor

Although Ceramic tiles are factory sealed, after cleaning I dried the tile and grout with a heat gun and then sealed with Tile Doctor Wall Tile Aerosol Sealer. This would ensure the grout was sealed and it also ensures that water runs straight off the tile.

The last step was to strip out the old silicone sealant that ran around between the bathtub and the tiles and replace with new in white.

Bathroom Shower Tile After Cleaning Handforth

The work was completed in less than a day and the customer was very happy with their revamped bathroom. It now looked a lot more inviting and more like it had when it was installed. I also suggested they should use Tile Doctor Aqua Pro to maintain the tile and grout going forward, its designed for cleaning bathroom tile and will help prevent the build-up much more effectively than the household cleaners they had been using previously. It also has a fresh lemon scent which leaves the room smelling clean and fresh.

Professional Restoration of a Ceramic Tiled Bathroom Shower in East Cheshire

Bathroom Shower Tile & Grout Renovation in Handforth Read More »

Bathroom Wall Tile Before and After Renovation in Stockport

Tile and Grout Refresh for Neglected Bathroom in Stockport

Grout-Cleaning, Quarry Tile Cleaning, Wilmslow Tile Cleaning, Work History / Kamila Logonzy

If you’re a landlord, it can be quite difficult to know what your tenants are getting up to and whether they are taking good care of your property. It’s usually only when major problems emerge that a landlord will get involved.

Such was the case with a recent customer of mine who owns a property in Stockport, a large town in Greater Manchester not too far south from the main city centre. The tenants of the property either neglected or didn’t know how to take care of the tiled shower walls in the bathroom. Over time, the condition of the tiles and grout had become so appalling that the landlord had to call Tile Doctor to see about restoring them.

Bath Shower Tile Before Refresh Stockport

Cleaning Dirty Shower Tiles

I began the restoration by cleaning the grout lines, which were truly filthy. This was done using a strong solution of Tile Doctor Pro Clean. Pro-Clean is an ideal product for cleaning up neglected tiles and grout, since it removes all manner of dirt, including the soap scum and grease which had built up on these shower walls over the course of several months.

The product was left to dwell for a couple of minutes before being scrubbed deep into the grout. The area was subsequently rinsed with fresh water to remove the soil. In some stubborn places, I didn’t achieve the desired result right away, so I repeated the cleaning process a couple of times.

When the grout and tiles were cleaned to the best of my abilities, I used my heat gun to dry the walls quickly. Next, I removed all the mouldy silicone around the shower, a process which proved quite tricky because the tiles were all quite small, and there was newer silicone on top of old, very mouldy silicone, so I had to dig in deep to get it all out.

After doing this, I had to clean and dry the gap between the tiles and the bath because the old mouldy silicone didn’t leave it in a pretty state.

Sealing Shower Tiles

After everything was cleaned and dried, I sealed the walls using Tile Doctor Wall Tile and Grout Sealer Aerosol Spray. What makes this such a brilliant product is how easy it is to use. It is a spray-on sealer that adds long lasting protection against water, dirt, grease, mould and limescale. This reduces the amount of maintenance required.

When I had finished sealing the tiles and grout, I applied new, high quality and mould resistant silicone. With that, the restoration was complete. The whole process took only a day’s work, but you must agree that a fantastic outcome was achieved. The landlord and tenants were very happy with it, remarking that if they didn’t know any better, they would’ve thought it was a brand-new installation.

Bath Shower Tile After Refresh Stockport

Source: Dirty Bath Tile and Grout Cleaned and Sealed in Stockport

Tile and Grout Refresh for Neglected Bathroom in Stockport Read More »

Porcelain Tiled Floor Before After Grout Colouring Nether Alderley

Changing Grey Grout to Cream at Nether Alderley New Build

1 Comment / Alderley Edge Tile Cleaning, Porcelain Tile Cleaning, Work History / Kamila Logonzy

We were contacted by a national builder of luxury homes to see if we could help sort out a grout problem with an expensive Porcelain tiled floor. Whilst most the work we do relates to the cleaning and sealing of tile and stone we also get asked to consult on related issues. On this occasion it turns out their tiler had done a great job tiling the floor with 240m2 of large format porcelain tiles, but the grout used was the wrong colour.

The property affected was in Nether Alderley which is a very desirable part of East Cheshire about a mile south of Alderley Edge. An appointment was arranged with the property developer to inspect the problem and advise on a solution.

Porcelain Tile Before Grout Colouring Grey to Ivory in Nether Alderley

On the day of the visit I was advised that they didn’t want to remove and relay the floor as the cost would be prohibitive and the inconvenience to the homeowner excessive. The developer suggested removing the grout and replacing with the right colour however I advised to do so would take a long time also there was a high risk of chipping the tiles.

The remedy I suggested was to recolour the grout lines with a Tile Doctor Grout Colourant. I have used this method successfully before and I could guarantee there would be no dust and minimal inconvenience to the family, it was an obvious solution. The original grout was grey which really stood out against the cream tile however being quite dark it was clear at least two coats of Ivory grout colourant would be needed.

The builder was happy to go ahead with this solution and we arranged a time to come back. The floor was a very large area so the work would take some time to complete.

Recolouring the Grout on a Porcelain Tiled Floor

Working in sections the first job was to wash and scrub the grout lines with Tile Doctor Grout Colourant Pre- Treatment Cleaner which lightly etches and cleans the grout lines to ensure an improved bond with the new colourant.

Porcelain Tile During Grout Colouring Grey to Ivory in Nether Alderley

The grout was then dried off with some gentle assistance with a heat gun to speed up the process. Once dry the next task was to apply the first coat of Ivory colourant. The colourant is applied by dipping a small brush into the colourant then scrubbing it into the grout lines. Any residue left on the tiles is easily wiped off with a baby wipe to leave a nice crisp line. If you’re doing this yourself then it’s worth noting that Tile Doctor sell a Grout Colourant Kit that includes the pre-treater, colourant and the brush.

Porcelain Tile After Grout Colouring Grey to Ivory in Nether Alderley

It took two days to complete the work saving the house builder thousands of pounds, there was no mess and the family were only slightly inconvenienced. The builder was that impressed we did six more homes on that estate and I understand he has since used the same process with another Tile Doctor in Yorkshire.

Another advantage of the grout colourant is that it forms an impervious layer over the grout, effectively sealing it in and making it much easier to keep clean going forward.

Professional Recolour of Grout on a Porcelain Tiled Floor in East Cheshire

Changing Grey Grout to Cream at Nether Alderley New Build Read More »

Farmhouse Victorian Tiled Floor Before After Restoration Jodrell Bank

Victorian Tiled Hallway Restoration at Jodrell Bank Farmhouse

1 Comment / Holmes Chapel Tile Cleaning, Victorian Tile Cleaning, Work History / Kamila Logonzy

We received an enquiry from a client who had just brought a farmhouse with a Victorian Tiled floor close to Jodrell Bank near the village of Goostrey. Jodrell Bank is a few miles north of Homes Chapel and famous around the world for the nearby Jodrell Bank Observatory which is an astrophysics centre and part of the University of Manchester.

Victorian Tiled Hallway Before Restoration Jodrell Bank

On restoring the farmhouse, the client discovered a Victorian tiled floor hidden under their hall carpet and wondered if it was worth saving. I rang the client up to arrange a day to do a test clean and talk through the process of restoring the floor. Turns out the floor was looking washed out and there were a few tiles that would need replacing. I went over to survey the floor and complete a test clean which worked out well. Certainly, the client was happy with the result and could now see the floors potential, so a date was arranged to start work.

Victorian Tiled Hallway Before Restoration Jodrell Bank Zoom

Cleaning/Repairing a Farmhouse Victorian Tiled Hallway Floor

The first job was to cut out the damaged tiles and replace them, this was done using spare tiles I had been saving over the years for replacements and they were fixed using rapid set tile adhesive which meant I was able to start cleaning the floor after two hours.

To get the years of ingrained dirt out of the tiles I used Tile Doctor Acid Gel which is a blend of phosphoric and hydrochloric acids in a gel form, so it stays on top of the tiles and does not run off. This was left to dwell for a good ten minutes before scrubbing the floor using a weighted floor buffer fitted with a 200-grit resurfacing pad. A little water was used to lubricate the resurfacing pad and dilute the acid gel which helps stop efflorescence which is often a problem with floors of this age. The solution soon turned into a dark slurry which was then removed using a vet vacuum.

The next step was to repeat the process using more water and a 400-grit burnishing pad which refines the surface after the application of the coarser 200-grit pad. After more rinsing and extracting the floor was wiped using a microfibre cloth and then left to dry out overnight so it would be ready for sealing the next day.

Sealing a Farmhouse Victorian Tiled Hallway Floor

The next morning, I took a couple of moisture readings with a damp meter to make sure the floor was dry and ready to seal. The results were good so three coats of Tile Doctor Seal and Go Extra were applied using a clean microfibre cloth rubbing in circles to blend the polymers together to leave a semi sheen to the floor. I chose Seal and Go Extra due to the fact that it’s a breathable sealer that will cope with any moisture rising through the floor, this is an important consideration with old floors as they don’t have a damp-proof membrane installed under the floor.

Victorian Tiled Hallway After Restoration Jodrell Bank Zoom

The client was very satisfied with the restoration, it looked better than they had expected and of course a lot nicer than the previous hall carpet! I recommended they should use Tile Doctor Neutral Tile Cleaner to maintain the floor which is pH neutral and will ensure the longevity of the seal we had applied.

Victorian Tiled Hallway After Restoration Jodrell Bank

Professional Restoration of a Victorian Tiled Hallway in East Cheshire

Victorian Tiled Hallway Restoration at Jodrell Bank Farmhouse Read More »

Travertine Floor Tiles Before After Polishing Mottram St Andrew

Large Pitted Travertine Floor Filled and Polished in Mottram St Andrew

1 Comment / Alderley Edge Tile Cleaning, Travertine Tile Cleaning, Work History / Kamila Logonzy

This customer lives in the small yet sought after village of Mottram St Andrew near Alderley Edge in East Cheshire. I was asked to do something about the Travertine tiled floors which had become an eye sore due to many black holes and pits that where appearing. This is not an unusual problem for Travertine, it’s a very porous and Acid Sensitive stone so it’s not a good idea to use powerful acidic cleaning products which are quite common in supermarkets. They reduce the life of the sealer and can actually eat into the travertine. Pitting is also a common with this type of stone and easily traps dirt, so we always recommend having the pits filled.

Travertine Floor Before Polishing Mottram St Andrew

I visited the property to survey the floor and re-assured the owner the problems could be resolved, and the floors appearance restored. The floor was installed throughout much of the ground floor and as I suspected the previous sealer had worn down with use and now dirt was becoming ingrained in the pits and pores of the stone making it impossible to keep clean.

Cleaning and Burnishing a Large Travertine Floor in Mottram St Andrew

To restore the appearance of the Travertine the tiles would need to be polished using a set of Burnishing Pads that would cut through the dirt and polish the stone. Before starting however, I made sure any exposed woodwork was protected which included removing the kickboards from underneath the kitchen units.

The first pad was a coarse 400 grit which fits onto a rotary machine and is applied to the Travertine tiles with water spread which acts as a lubrication. The pads literally scratch off the dirt and the resultant slurry is then removed with a wet vacuum. The floor is then washed, and the process was repeated with the next two pads which are 800 and 1500 grit, again using water to lubricate (although less than the 400-grit) and rinsing and extracting in between the application of each pad. These higher grit pads are much finer and slowly restore the finish of the stone.

There was a lot of surface area to cover so this process took up the whole of the first day and the floor was then left to dry off overnight.

Polishing and Sealing a large Travertine Floor in Mottram St Andrew

When I came back the next morning, I finished off the burnishing process using the last floor pad in the Burnishing set which is applied dry to the floor with a few squirts of water. This final pad is 3000 grit which is super fine and builds up a high gloss shine on the Travertine, it also leaves the floor dry and ready to be sealed.

Travertine Floor After Polishing Mottram St Andrew

I then sealed the floor using a single coat of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the Travertine occupying the pores and preventing dirt from becoming ingrained into the stone. Colour Grow also enhances the natural colours in the stone and in this case, it did a great job of bringing out the brown shades in the Travertine.

The next step was to fill the holes in the Travertine throughout using appropriate colours of stone filler. The filler is left to dry and harden before the excess is polished off using a white buffing pad. Once done the floor is vacuumed to remove dust before applying another coat of Colour Grow sealer which was allowed to dry before giving the floor a final polish with a new 3000-grit burnishing pad to achieve a deep shine. Given the size of the floor I was able to work in sections, polishing, sealing, filling etc, moving onto the next section as the sealer dried.

The process made a huge difference to the floor which now looks much lighter and is not spoilt by the dark patches brought about by the pitting.

Professional Travertine Floor Polishing in Cheshire

Large Pitted Travertine Floor Filled and Polished in Mottram St Andrew Read More »

Quarry Tile Grout Hearth Before and After Renovation Wilmslow

Renovating a Quarry Tiled Hearth in Lindow End

1 Comment / Grout-Cleaning, Quarry Tile Cleaning, Wilmslow Tile Cleaning, Work History / Kamila Logonzy

We received an inquiry from a client in Lindow End near Wilmslow Golf Club in the Cheshire stockbroker belt. They were restoring their home and were unhappy with the state of the Quarry tiled hearth under their log burning stove. We arranged a site visit to survey the tile and grout and provide a quote for restoring the appearance. The village is situated in what’s known as the ‘Cheshire Golden Triangle’ which is one of the most sought-after places to live in the UK after London. As a result, we often find ourselves in this area working on some very nice properties, so it wasn’t long before we were able to call in and survey the tiles.

Quarry Tiled Hearth Before Grout Colouring Lindow End

As you can see from the pictures the hearth was quite dirty and the grouting had discoloured from years of use of the wood burner. The work here was a minor part of their restoration which had included significant building work. We agreed a price to carry out the work, which should only take a day and were able to return the following week.

Cleaning a Quarry Tiled Hearth

Our first job was to cover the newly sanded and sealed wooden floors with dust sheets, so we didn’t mark them as we came in the front door to the lounge. We always try and make as little mess as possible and we are always as careful as possible.

We then sprayed Tile Doctor Pro-Clean on the fire hearth tiles. This is a multi-purpose tile and grout cleaner which would make light work of the dirty tiles. The product was left to soak into the Quarry tile and grout for about twenty minutes before being scrubbed in. The hearth was a small area, so this was done by hand and then washed down with clean water.

The dirty residue was removed using a wet vacuum then the tiles where wiped down with a clean micro fibre cloth. We then dried off the tiles using a little encouragement with a heat gun to speed up the drying process. Speed drying the tile and grout in this manor would allow us to complete the work in one visit.

Applying Sandstone Grout Colourant

Once the tiles and grout lines were dry it was clear that years of dirt and soiling had stained the grout, so although no much cleaner it was clear more work would be needed to give the grout a fresh and consistent appearance.

To address this issue with the grout we selected to apply a Sandstone Tile Doctor Grout Colourant. This is applied with a small brush and brushed it into the grout lines. It is quite a precise job but any colourant that goes onto the tiles is removed with a baby wipe before it dries. This process really transformed the look of the grout, the colourant also forms a barrier over the grout which will protect it going forward and make it easier to clean.

Sealing Quarry Tiles

The Quarry tiles were then given a coat of Tile Doctor Colour Grow which is an impregnating colour enhancing sealer. This brings out the best in the quarry tiles and adds protection against future staining which will be needed given its location.

Quarry Tiled Hearth After Grout Colouring Lindow End

The client was very happy with the finish, in fact the hearth looked like it had been newly tiled, the impact of the recoloured grout was that striking. Sometimes the smallest jobs can be the most rewarding.

Professional Restoration of a Quarry Tiled Hearth in Cheshire

Renovating a Quarry Tiled Hearth in Lindow End Read More »

Old Quarry Tiled Kitchen Floor Before After Cleaning Goostrey

Quarry Tiled Kitchen Floor Deep Cleaned in Goostrey

1 Comment / Holmes Chapel Tile Cleaning, Quarry Tile Cleaning, Work History / Kamila Logonzy

Pictured below is an old Quarry tiled floor in the Kitchen of a house in the small farming village of Goostrey. I went over to survey the floor at the request of the owner who felt it was overdue a deep clean and seal.

Quarry Tiled Kitchen Floor Before Cleaning Goostrey

It was a classic floor that suited the kitchen and its Aga well however I’m sure it could tell a story. There were patches of white efflorescent salts in front of the Aga itself and another section of floor where the tiles were a slightly darker shade. I assume some replacements were made in this section at some point in the past. Efflorescence occurs when damp in the subfloor rises through the tiles depositing white alkaline salts on the surface of the tile as the moisture evaporates. This is quite a common problem in older properties where no damp proof membrane is present under the floor and more so where you have a warm Aga heating the space and encouraging evaporation.

As per usual the floor was survey noting all the points above and then I carried out a test clean on a small part of the floor. This helps me understand what products and process I need to follow in order to renovate the floor and thereby product an accurate quote for the work. This went well and the owner was happy for us to process so we agreed a date to start the work which would take two days.

Cleaning a Quarry Tiled Floor

To clean the floor and strip off any remaining sealer I first created a strong dilution of Tile Doctor Remove and Go which was sprayed onto the tiles and then left to soak in. Remove and go is a powerful stripper and cleaner that is safe to use on tile and stone. The product is designed to loosen paint stains, adhesives and many types of urethane and wax coatings so they can be easily removed.

After thirty minutes the solution was scrubbed into the tile and grout using a weighted rotary machine fitted with a black scrubbing pad and running at a slow speed. The resulting cleaning slurry was rinsed off with water and then extracted from the floor using a wet vacuum. I repeated this process until I was confident the tiles were clean and free of old sealer.

The next step was to neutralise the alkaline salts in the floor which could later lead to efflorescence by treating it to an acid wash using Tile Doctor Acid Gel. The gel was left to soak in for five minutes before washing it off using the wet vacuum to get the floor as dry as possible.

Quarry Tiled Kitchen Floor During Cleaning Goostrey

Sealing a Quarry Tiled Floor

The floor was left to dry out overnight and the next morning I returned to the property and took some readings from the floor with a damp meter. It’s important to check the floor is dry before sealing because any excess moisture can cloud the sealer and prevent it from doing its job properly.

Once satisfied that the floor was dry, I applied a single coat of Tile Doctor Colour Grow which is a breathable impregnating sealer that enhances colour and protects from within. I left the floor to dry for one hour and then followed up with four coats of Tile Doctor Seal and Go which provides both a robust surface seal and a long-lasting low sheen finish. The new sealer transformed the tiles and gave the whole floor a uniform appearance

Quarry Tiled Kitchen Floor After Cleaning Goostrey

The customer was very impressed with our work and asked if we can come back later to remove the white tiles in front of the Aga and replace with Quarry tiles to match the rest of the floor.

Professional Quarry Tiled Floor Restoration in East Cheshire

Quarry Tiled Kitchen Floor Deep Cleaned in Goostrey Read More »

Victorian Floor Before After Restoration Hale Barns

Victorian Tiled Hallway Altered and Restored in Hale Barns

1 Comment / Altrincham Tile Cleaning, Victorian Tile Cleaning, Work History / Kamila Logonzy

We were contacted by an architect who was working on the redevelopment of a late Victorian property in Hale Barns, their client wanted to restore the property to its former glory and several internal changes meant reconfiguring the doorways on the ground floor. This in turn would impact the elegant Black and White Victorian tiled hallway floor and the request was for us to lift half the tiled floor and then replace it once the internal changes were complete.

Black White Victorian Hallway Floor Before Restoration Hale Barns

Certainly, an interesting request and one we were happy to quote for. Hale Barns is an affluent part of Cheshire with a mixture of late Victorian and ultra-modern housing popular with footballers, so It’s refreshing to see a period property like this sympathetically restored instead of being demolished.

Lifting and Rebuilding a Victorian Tiled Hallway Floor

The first part of the works involved removing the section of flooring that would be disrupted by the internal changes. Normally we would carefully cut out one tile so we can get a purchase on the remainder from underneath; however the floor had some loose tiles so it simply a question of lifting these then putting a flat plate under the rest and popping them up. I make it sound simple but doing it without damaging a tile takes patience.

Black White Victorian Hallway Floor During Tile Removal Hale Barns

Black White Victorian Hallway Floor During Removal Hale Barns

The lifted tiles were stored in buckets containing a 4:1 dilution of Tile Doctor Pro-Clean and water. The tiles were left so soak for a couple of days to soften the adhesives, grout and dirt before being cleaned off and left to dry out.

Once the building work was completed, we were called back into rebuilt the Victorian floor taking into account the new door thresholds. The first job was to level the floor with fast drying self-levelling compound to provide a new sub-base for the tiles. This was left to dry overnight and the next day we started laying the floor back down with fast setting tile adhesive. Once the floor was laid, we left for the day, so it could set overnight.

Black White Victorian Hallway Floor During Restoration Hale Barns

Lifting and Rebuilding a Victorian Tiled Hallway Floor

Next day we checked the tiles were set before starting to clean with a set of abrasive burnishing pads which attach to a slow speed weighted rotary floor machine. We started with a very coarse 100-grit pad and use water to help lubricate the process, the resulting soil is then rinsed off and removed with a wet vacuum. Using exactly the same process we continue to further refine the tiles by working our way through ever finer grades of pads until we get to 1500-grit. The floor was then washed with Tile Doctor Acid Gel and this is left to soak into the tile before being washed off with water. Giving the floor an acid wash in this fashion helps clean the tile of old mineral deposits and also neutralises any alkaline salts in the floor which could cause problems later on, this is a common issue with old floors more commonly known as efflorescence. The floor was dried using the wet vacuum to remove as much moisture as possible before being left to dry off overnight.

Sealing a Victorian Tiled Floor

The next morning, I finished off the restoration of the floor with the application of a very fine 3000-grit burnishing pad which gave the floor a light sheen. This final pad is applied dry with only a little water sprayed onto the tile using a method we call a ‘Spray Burnish’.

The floor was then checked for moisture with a damp meter to make sure it was dry before sealing. All was well and two coats of Tile Doctor Colour Grow sealer were applied to protect the floor going forward. Colour Grow is a fully breathable impregnating sealer that will enhance the colour of the black tiles and being breathable will cope well with any moisture rising through the floor. Once the sealer had dried fully the floor was buffed with the 3000-grit pad leaving a sheen as requested by the client.

Black White Victorian Hallway Floor After Cleaning Hale Barns

Black White Victorian Hallway Floor After Sealing Hale Barns

The result was quite a transformation that was well received by the architect and their client.

Professional Victorian Tiled Floor Restoration in Hale Barns

Victorian Tiled Hallway Altered and Restored in Hale Barns Read More »

Marble Bathroom Counter tops Before and After Polishing Bowden

Marble Bath Surround Polished in Bowden

1 Comment / Altrincham Tile Cleaning, Marble Tile Cleaning, Work History / Kamila Logonzy

Although most of the work we do involves floor cleaning you should know we also cover stone worktops in Kitchens and countertops in bathrooms. An example being this opulent bathroom with Marble countertops that surrounded the sink and bath.

The bathroom was installed at a house in the up-market area of Bowden which together with the villages of Hale and Hale Barns are regarded as being the wealthiest parts of Greater Manchester. The customer had got in touch to ask if we could restore the appearance of the Marble surrounds which had become dirty and etched through general use.

Marble Bath Surround Before Polishing Bowden

Restoring the Appearance of Marble Countertops

My first job was to protect the wood panelling and lush red carpet that surrounds the bath, once all was protected we started to use a set of tile doctor six-inch burnishing pads to clean the Marble and restore the polish.

The Burnishing pads come in a set of four and are applied to the stone with a little water in sequence from the coarse 400 grit pad which removes etching and then through the medium 800-grit, fine 1500-grit and finally the very fine 3000-grit pad which restore shine to the Marble. I use a hand-held buffing machine to do this and carefully rinse in-between each pad to remove the small amount of slurry which is generated.

The last 3000-grit pad is applied with just a spay of water using what we call a spray burnish technique, this also has the benefit of leaving the stone dry which is exactly how we need it for the next step in the restoration process which is applying a sealer.

Sealing Marble Countertops

To finish off the restoration, I proceeded to seal the Marble tops with Tile Doctor Ultra Seal which is an impregnating sealer that soaks into the pores of the stone protecting it from within. I should add, Ultra Seal is a natural look sealer that doesn’t change the colour of the stone.

The sealer is applied with a soft cloth, left for five minutes and then the excess is polished off with a soft cloth. We also replaced the silicone sealant around the bath and wash basins and once we were finished the bathroom looked newly installed.

Marble Bath Surround After Polishing Bowden

The customer was over the moon that we brought life back to her impressive bathroom.

Professional Marble Vestibule Polishing in Cheshire

Marble Bath Surround Polished in Bowden Read More »